For setting summer temperature setbacks for energy savings in Los Angeles, 78°F is a practical starting point when you’re home and active, in line with recommendations from the U.S. Department of Energy and ENERGY STAR. During a heat wave in the San Fernando Valley, a daytime setting of 74-76°F may better balance comfort with cooling demand.
A single temperature won’t feel right in every home, especially when outdoor heat, sun exposure, and household routines change through the day. The goal is to choose a comfortable setting, then raise it when the home is empty rather than cooling rooms more than needed.
This guide explains whether 78°F is a suitable summer setting, how to adjust the thermostat during a California heat wave, and what setbacks can make sense when you’re away or asleep. You’ll also learn how simple steps, such as using ceiling fans and limiting direct sun, can help you stay comfortable without relying on a lower thermostat setting.
Key Takeaways
- Use 78°F as a starting point when you’re home and active, then adjust for comfort during intense heat.
- Program a higher setting while you’re away so the system cools less when no one is home.
- Learn how a setback of 7-10°F for about eight hours a day can affect annual heating and cooling costs.
- Separate energy-saving recommendations from legal requirements, and see what the available information says about local thermostat limits.
- Consider who’s at home before using a setback; older adults and others vulnerable to heat may need extra care during a heat wave.
1. What is the best thermostat setting during a California heat wave?
Set your thermostat to 78°F when you’re home and active as a practical summer starting point. The U.S. Department of Energy and ENERGY STAR recommend this setting. In hotter parts of Los Angeles, some households may prefer 74-76°F during a heat wave. The right choice depends on comfort, outdoor heat, sun exposure, and how well the home holds cooler air.
Keep the setting steady rather than making large temperature swings. A consistent schedule avoids asking the air conditioner to recover from a very warm indoor temperature all at once. Choose a reasonable target and let the system maintain it. During prolonged heat, extended HVAC runtime is normal, especially when outdoor temperatures stay high through the afternoon.
Programmable and smart thermostats make steady schedules easier. Set a comfortable temperature for the hours you’re home, then schedule a higher setting when you’re away. Southern California Edison recommends 85°F while occupants are away. A programmable thermostat can apply that change automatically, so the system runs less while the home is empty.
Sleep settings can differ from daytime settings. A 74-76°F setting may suit Los Angeles households prioritizing comfort, while a setback to 82°F is another option. Try a gradual schedule change and consider whether bedrooms stay comfortable. Ceiling fans can help people feel cooler and may let you raise the thermostat two to three degrees.
Renters can reduce air conditioning use without changing the thermostat by closing blinds or curtains against direct sunlight and using ceiling fans for comfort. In coastal areas, opening windows when evening air is cooler may help release indoor heat. Close them again as outdoor temperatures rise so afternoon heat doesn’t build inside.
Appliances can add heat indoors, so when practical, avoid running heat-generating equipment during the hottest part of the day. Keep airflow around vents clear, and use fans only in occupied rooms. Fans cool people, not empty rooms, so turn them off when you leave.
During a heat wave, change one part of the schedule at a time and observe how your home responds. If rooms stay hotter than the setpoint or the air conditioner runs continuously without reaching it, thermostat changes alone may not solve the problem. A heat pump also needs a setting suited to household comfort and the home’s cooling conditions.
For a simple starting schedule, use 78°F at home, raise the setting while away, and choose a sleep temperature that feels comfortable. Then make small adjustments rather than chasing rapid changes. This approach supports setting summer temperature setbacks for energy savings in Los Angeles without sacrificing a livable indoor climate.
2. Should You Really Set Your Thermostat to 78 in the Summer?
Yes, 78°F can be a reasonable setting while you’re home, but it isn’t the only useful target. The bigger opportunity often comes when the house is empty. A Los Angeles home can use an 80-85°F thermostat setting while occupants are away for the day. That reduces cooling demand without leaving the air conditioner set to maintain the same indoor temperature as an occupied home.
Switching the air conditioner off completely isn’t the only way to save electricity. ENERGY STAR suggests roughly 85°F when a home is empty, and the recommendation is to use that warmer setting instead of turning cooling off. A setback keeps the system from maintaining a lower temperature while no one is home. It also avoids returning to a house that has been allowed to heat up without any cooling.
The U.S. Department of Energy says turning a thermostat back 7-10°F for about eight hours a day can reduce annual heating costs by as much as 10%. That guidance describes a setback over a defined period, not a promise of the same savings for every California household. Weather, how long the home is empty, and the difference between the usual setting and the setback all affect how much the cooling system runs.
Set the schedule around your actual routine. Raise the temperature while everyone is away, then return to a comfortable setting before people come home. If departure or return times change, adjust the schedule instead of leaving the empty-house setting in place after everyone returns. Smart thermostats can automate these changes; with a manual thermostat, remember to adjust it yourself.
Consider indoor conditions during hot weather. A warmer setting can reduce air conditioner runtime, but heat gain also depends on sunlight through windows, insulation, and how long the house is empty. Closing window coverings or installing solar film from providers like Mr Tint can limit heat buildup and support the setback. If the home feels uncomfortably warm when you return, make a smaller adjustment next time rather than setting the thermostat unusually low.
To test a setback, start with your usual occupied setting, raise it during a typical time away, and note how comfortable the home feels when you return. Change one thing at a time. Comparing similar weather conditions gives you a clearer sense of the effect. A smart schedule can make repeated adjustments easier, while a manual setting may work well for households with consistent routines.
If schedule automation is the missing piece, explore smart thermostat options suited to your cooling routine.
3. How many degrees should I raise the thermostat when away in summer to save energy?
A practical target is a setback of 7-10°F for about eight hours a day. The U.S. Department of Energy estimates this schedule can save about 10% a year on heating and cooling. The useful amount depends on your normal setting and how long the home stays empty.
Use your occupied temperature as the starting point. If you normally set the thermostat to 78°F, an 85°F away setting is a 7°F increase. That matches the lower end of the recommended setback. If your usual setting is already warmer, raise it by a smaller amount to avoid exceeding the suggested away range of 80-85°F.
Each degree matters, but savings are estimates, not a fixed credit on an electric bill. A general estimate puts cooling-cost savings at roughly 3% for each degree above the usual baseline. The same guidance says a 72°F setting can cost around 18% more to cool than 78°F. Treat these figures as planning guidance, not a precise prediction for every Los Angeles home.
Base the schedule on the hours your home is actually empty. Raise the temperature when the last person leaves, then restore the occupied setting shortly before someone returns. A programmable thermostat can follow a stable weekday routine. Smart thermostats make changes easier when work hours or summer plans vary.
For an initial test, choose one away setting and keep it consistent during similar weather. Note the setting, how long the home is empty, and how comfortable it feels when you return. If the house feels too warm, make the setback smaller next time. Avoid changing several schedule points at once, which makes the outcome harder to assess.
Do not treat a larger setback as automatically better. The recommended summer range while away is 80-85°F, and the home’s ability to remove humidity can also matter. Sun through windows, indoor heat from appliances, and the day’s weather affect how warm rooms become. Close window coverings during strong sunlight, then let the thermostat schedule handle the cooling adjustment.
For a long absence, focus on reducing unnecessary cooling rather than automatically switching the system off. A higher setpoint allows the indoor temperature to rise while maintaining some cooling. The right setback balances energy savings with your return time and comfort needs.
In short, start with a 7°F increase from your usual setting, then assess the result during comparable weather. For a 78°F occupied setting, that means 85°F while away. Use a smaller increase if that setting makes the home uncomfortably warm or does not suit your household.

5. Do California or Los Angeles energy rules set limits on residential thermostat temperatures
The settings discussed for saving energy are recommendations, not legal temperature limits. The U.S. Department of Energy and ENERGY STAR recommend 78°F while people are home and active. Southern California Edison recommends 85°F when occupants are away. These figures guide energy use; they do not prescribe a required residential setpoint.
This distinction matters when choosing a setting. A recommended temperature is a practical starting point, while a legal limit is a requirement. The energy recommendations here focus on reducing cooling demand, not enforcing one indoor temperature in every home. Adjust the setting to suit comfort, household needs, and local weather.
For example, 78°F can be a starting point during occupied hours, while 85°F is an energy-saving recommendation for an empty home. Neither figure should be treated as a mandatory California thermostat setting. The City of Irvine also advises setting the summer thermostat as high as is comfortable, connecting the choice to cooling demand rather than a fixed requirement.
Winter advice makes the same distinction clear. The Los Angeles Department of Water and Power recommends 65 degrees in winter. That is a recommendation from the utility, not a summer setting or a residential temperature rule. Keep the season and purpose attached to each number so winter guidance isn’t mistaken for a summer requirement.
When reviewing a temperature figure, identify who issued it and what it describes. A utility recommendation about an empty home, such as Southern California Edison’s 85°F setting, is different from a rule that requires every resident to use that temperature. Likewise, the 78°F recommendation applies to summer cooling while people are home and active. Don’t treat either figure as a universal legal boundary.
For day-to-day use, choose a setting based on occupancy and comfort, then apply energy guidance where it fits. A household might use 78°F while active at home and a higher temperature while away. If someone is uncomfortable, adjust the setting rather than treating the recommendation as a strict target. Energy-saving advice is useful when it supports the people living in the home.
In short, the California and Los Angeles energy guidance described here offers recommended settings, not a mandatory residential setpoint. Use each figure in its stated context: 78°F for an occupied summer home, 85°F while occupants are away, and 65 degrees for the LADWP’s winter recommendation. That keeps practical energy advice separate from a legal thermostat limit.
5. Are summer thermostat setbacks safe for pets, children, older adults, or people with health conditions
A summer setback should account for everyone and every pet at home. An energy-saving setting for an empty house may not suit someone who stays home during the day. Before raising the thermostat, consider who will be indoors, how long they’ll be there, and whether they can adjust the temperature themselves.
Older adults are more vulnerable to heat-related illness during extreme heat. Put their comfort first when choosing a daytime setting, and don’t make a large change simply to reduce cooling. During a heat wave, prioritize a comfortable indoor space over an away schedule if an older adult is home.
For pets, plan for the time they’ll be alone. Provide fresh water, maintain airflow, and make a cool resting area available. Avoid excessive indoor heat, especially during a hot spell. Set the thermostat schedule around your pet’s needs, not only the household’s departure and return times.
Include children and people with health conditions in your occupancy plan. If they’re home, choose a setting that keeps the indoor space comfortable rather than using the higher setting intended for an empty house. Make sure someone can adjust the thermostat if conditions change. A schedule that suits one person may not work equally well for everyone.
Room conditions can differ from the thermostat reading. In a two-story home, heat naturally rises, so upstairs rooms may feel hotter than downstairs rooms. Consider where children, older adults, or pets spend time before setting a setback. A comfortable reading downstairs may not reflect conditions in a sunny upstairs bedroom.
During a heat wave, use a simple routine: identify who will be home, set the thermostat for their comfort, and maintain airflow. Keep water and a cool resting area accessible for pets. If plans change, adjust the schedule instead of leaving the away setting on while people are indoors.
When everyone leaves, a higher setting can reduce unnecessary cooling, but account for when they’re expected back. During extreme heat, don’t treat a setback as a fixed rule for every day. Reassess the home’s conditions and who is inside, especially if an older adult, child, pet, or person with a health condition needs a cooler space.
Use energy-saving schedules only when they suit your household. Fresh water, airflow, a cool resting area, and a comfortable setting when people are home are practical safeguards in hot weather. A schedule that responds to people and pets is more useful than one that applies the same setback regardless of who’s home.
Around the Clock Heating and Air Conditioning
Around the Clock Heating and Air Conditioning can help when thermostat adjustments aren’t enough to keep your home comfortable. If rooms stay hot, airflow feels weak, or your air conditioner can’t reach its setpoint, the cause may be system performance rather than the schedule alone.
We install, repair, and maintain residential heating and cooling systems, including Lennox Central Air Conditioners and Lennox Heat Pumps. Our team can assess how your cooling system performs and whether a repair or system update suits your home. The goal is a well-matched solution, not simply a lower thermostat setting.
If you’re ready to discuss your home’s cooling needs, contact Around the Clock Heating and Air Conditioning.
Make Your Summer Schedule Work for Your Home
A useful cooling routine should fit the way your household actually lives. As schedules, occupancy, and comfort needs shift through the summer, revisit your thermostat program rather than relying on settings that no longer match the day. A considered approach to setting summer temperature setbacks for energy savings in Los Angeles starts with observing how your home responds and making deliberate adjustments.
Watch for recurring discomfort, rooms that stay warm, or cooling that doesn’t seem to keep pace. These patterns may point to a problem that schedule changes alone won’t address. A well-matched system and thoughtfully chosen controls can support comfort while helping you use cooling with intention.
Choose a next step that suits your home, whether that means refining your routine or discussing system performance with a heating and cooling team. Small, informed decisions can make summer comfort feel more manageable.
Build a routine that feels comfortable, practical, and ready for the season ahead.
Frequently Asked Questions
What is the best thermostat setting during a California heat wave?
Use 78°F as a starting point while you’re home and active. The U.S. Department of Energy and ENERGY STAR recommend this summer setting. In Los Angeles Valley homes, 74-76°F may suit households that prioritize comfort during a heat wave. Choose based on how the home feels and who is inside. If one room feels warmer, consider airflow and sun exposure before lowering the thermostat for the entire home.
Does turning the AC off while at work save money?
It can reduce cooling while you’re away, but ENERGY STAR suggests setting the summer thermostat to roughly 85°F in an empty home instead. That approach maintains a warmer indoor target rather than switching cooling off completely. For example, schedule the higher setting for work hours and restore your preferred occupied setting before returning. The useful choice depends on your routine, the home’s heat gain, and how comfortable it feels when you arrive.
How much does a higher setpoint actually save?
Each degree above your usual summer baseline is associated with roughly 3% lower cooling costs in the provided estimate. The U.S. Department of Energy estimates that a 7-10°F setback for 8 hours a day can save about 10% a year on heating and cooling. These figures describe different comparisons, so don’t add them together. Your results depend on your starting temperature, schedule, weather, and how the home holds heat.
Is 72°F bad for my energy bill in summer?
A 72°F setting can increase cooling costs compared with a warmer target. The provided estimate says cooling a home at 72°F typically costs around 18% more than setting it to 78°F. If 72°F feels necessary in one room, first consider whether sunlight or blocked airflow is affecting comfort. A ceiling fan may help people feel cooler without requiring the whole home to stay at the lower setting.
Quick Answer: What’s the Best AC Temp for Summer?
Set your AC to 78°F while you’re home and active as a practical starting point. The U.S. Department of Energy and ENERGY STAR recommend that setting for summer occupancy. Comfort can vary with the home and household, so adjust gradually rather than making a sharp change. If you’re away, use a higher temperature; if someone stays home, choose a setting that keeps the occupied space comfortable.
Should I turn the AC off completely when I leave?
For a typical day away, use a higher thermostat setting rather than switching cooling off completely. ENERGY STAR suggests roughly 85°F when the home is empty. This gives the system a warmer target while limiting unnecessary cooling. A scheduled setback can be useful if your departure and return times are predictable. For a changing routine, update the schedule so an away setting doesn’t continue after people return.
Should You Really Set Your Thermostat to 78 in the Summer?
Yes, 78°F is a suitable starting point when people are home and active, according to the U.S. Department of Energy and ENERGY STAR. It isn’t a requirement to use that exact temperature in every room or household. If 78°F doesn’t feel comfortable, make a modest adjustment and observe the result. Ceiling fans can improve personal comfort, while shading sunny windows can limit indoor heat gain.
What is the recommended summer thermostat setting in Los Angeles when home?
Start at 78°F while home and active. For Los Angeles Valley households during heat waves, 74-76°F may better match comfort preferences. Local conditions differ: a sunny room may feel warmer than a shaded one, even at the same thermostat setting. Try adjusting airflow and window coverings before lowering the setting throughout the home. Keep household members’ comfort in mind as temperatures rise outdoors.